Hard disk bracket installation method: first observe the structure of the bracket, its four corners have prominent places, the purpose is to align the screw positioning.
Installation method of hard disk bracket: first observe the structure of the bracket. There are prominent places on its four corners. The purpose is to align the screws. First open the board on the left side of the nail, and then align the screw hole of the hard disk with the bracket. Fix the hard disk on the nail and tighten the screws. Then install the bracket into the chassis and fix the bracket.
How to install the hard disk bracket
1. First of all, not all the hard disk brackets are the same. First of all, we need to observe the basic structure of the bracket. Generally speaking, they are similar. There will be two parts on the left side plate and four corners that protrude.
2、其次先将左侧的板子打开，将硬盘先对准支架放入，注意印有 PCB 字符的朝下，将硬盘放入支架后，让它的孔位和四个角对准。
2. Next, open the board on the left side, align the hard disk with the bracket first, and pay attention to the PCB characters facing down. After putting the hard disk into the bracket, align its hole position and four corners.
3. Then use screws to fix the hard disk and bracket. The screws must be tightened to ensure that the hard disk will not move back and forth in the bracket. After fixing, the bracket can be installed in the chassis.
4. Find the original location of the hard disk in the chassis, then put the bracket in the corresponding position of the chassis, and fix the bracket in the chassis. The installation sequence is: hard disk bracket chassis.
Is the hard disk holder universal
只要尺寸一样基本都是通用的，因为规格基本相同。硬盘的支架是将 2.5 英寸的硬盘转换成 3.5 英寸，然后方便安装在机箱里面的，如果直接将 2.5 英寸的硬盘装在机箱里，因为尺寸太小而不好固定，所以才需要用到支架，而它通常是规格差不多的所以通用。
As long as the size is the same, it is basically universal, because the specifications are basically the same. The bracket of the hard disk is to convert the 2.5-inch hard disk into 3.5-inch hard disk, and then it is easy to install in the chassis. If the 2.5-inch hard disk is directly installed in the chassis, the bracket is needed because the size is too small to be fixed, and it is usually of the same specification, so it is universal.
Hard disk bracket is to buy chassis to send?
不是。一般买机箱的时候并不会赠送硬盘的支架，它需要自己后面再买，因为正常来说大部分人选购电脑时，硬盘会选择比较标准的 3.5 英寸的的，但有时有些硬盘尺寸比较小，这就需要用到支架，它需要格外购买，当然也不排除有些品牌做活动会赠送支架，正常来说不会送。
no Generally, when you buy a computer case, you don’t give the holder of the hard disk as a gift. You need to buy it at the back of yourself, because normally when most people buy a computer, the hard disk will choose the standard 3.5 Inch, but sometimes the size of some hard disks is relatively small, so we need to use a bracket. It needs to be purchased extra. Of course, we don’t rule out that some brands will give away the bracket when they do activities. Normally, they won’t give it away.