• 欢迎访问速搜资源吧,如果在网站上找不到你需要的资源,可以在留言板上留言,管理员会尽量满足你!

【速搜问答】如何在Windows电脑上安装macOS系统

问答 admin 9个月前 (03-11) 155次浏览 已收录 0个评论

汉英对照:
Chinese-English Translation:

需要下载一个名为 Unibeast 的应用,一台可以使用的 Mac 电脑,还有一台支持 Windows 的电脑和一个空白硬盘。

You need to download an app called unibeast, a usable Mac, a Windows enabled computer and a blank hard disk.

本文会教你在 Windows 电脑上运行 macOS High Sierra 系统。你需要下载一个名为 Unibeast 的应用,一台可以使用的 Mac 电脑,还有一台支持 Windows 的电脑和一个空白硬盘。

This article will teach you how to run MacOS High Sierra on a Windows computer. You need to download an app called unibeast, a usable Mac, a Windows enabled computer and a blank hard disk.

准备安装

Ready to install

1、查看电脑系统配置。Windows 电脑必须有英特尔 i5 或 i7 处理器,还有至少 2GB 的内存,才能运行 macOS High Sierra 系统。按下面的方法查看电脑系统规格:

1. Check the computer system configuration. A Windows computer must have an Intel i5 or i7 processor and at least 2GB of memory to run MacOS High Sierra. Check the computer system specifications as follows:

打开“开始”菜单。

Open the start menu.

输入系统信息。

Enter system information.

点击菜单最上方的系统信息。

Click the system information at the top of the menu.

查看“处理器”标题右边的处理器名称。

Look at the processor name to the right of the processor heading.

往下滚动,查看“已安装的物理内存(RAM)”标题右边的数字。

Scroll down to see the number to the right of the installed physical memory (RAM) heading.

2、查看电脑的 BIOS 类型。在“系统信息”菜单中,看看“BIOS 模式”标题旁边写的是“UEFI”还是“BIOS”。记下这项信息,以备后用。

2. View the BIOS type of the computer. In the “system information” menu, see if “UEFI” or “BIOS” is written next to the “BIOS mode” title. Write down this information for later use.

然后就可以退出“系统信息”窗口了。

Then you can exit the system information window.

3、确认电脑操作系统的位数。Windows 电脑的操作系统有 32 位和 64 位之分。要安装 macOS 的 Windows 电脑必须能够支持 64 位操作系统。

3. Confirm the number of digits in the computer operating system. The operating system of Windows computer can be divided into 32-bit and 64 bit. To install MacOS, a Windows computer must be able to support a 64 bit operating system.

4、最好使用一台比较新款的 Mac 电脑,一定要能下载 macOS High Sierra 系统。

4. It’s better to use a relatively new Mac, and be sure to download the MacOS High Sierra system.

如果你的 Mac 电脑不能运行 macOS High Sierra,那就换一台可以支持它的。

If your Mac can’t run MacOS High Sierra, replace it with one that supports it.

5、备齐所需的设备。想在 Windows 电脑安装 macOS High Sierra,需要准备以下硬件:

5. All necessary equipment is available. To install MacOS High Sierra on a Windows computer, you need to prepare the following hardware:

优盘:容量至少 16GB 的闪存盘。

USB flash disk: a flash disk with a capacity of at least 16GB.

空白硬盘:找一个容量至少 100GB 的 USB 外置硬盘。你将在这里安装所有和 macOS 系统相关的东西,所以越大越好。

Blank hard disk: find a USB external hard disk with a capacity of at least 100GB. You’re going to install everything related to MacOS here, so the bigger the better.

USB-C 转换器:如果你使用的 Mac 电脑没有传统 USB 端口,那就得准备一个 USB-C 至 USB 3.0 转换器。

Usb-c converter: if your Mac doesn’t have a traditional USB port, you need to prepare a usb-c to USB 3.0 converter.

下载 Unibeast

Download unibeat

1、在 Mac 电脑上前往 Unibest 的下载站点 https://www.tonymacx86.com/ 。一定要在 Mac 电脑上下载,用 Windows 电脑会下载到错误的应用,复制到 Mac 电脑也无法使用。

1. Go to the Unibest download site on your Mac https://www.tonymacx86.com/ . Be sure to download it on Mac. If you use Windows computer, you will download the wrong application, and if you copy it to Mac, you will not be able to use it.

2、点击页面右上方的登录或注册。页面顶端会出现一个菜单。

2. Click login or register at the top right of the page. A menu appears at the top of the page.

3、在“电子邮件地址”字段中,输入你的电子邮件地址。最好使用能正常使用的电子邮箱,因为之后需要登录和确认电子邮件地址。

3. In the email address field, enter your email address. It’s best to use an email that works because you need to log in and confirm your email address later.

4、勾选靠近菜单底部的“不,现在就创建帐号”方框。

4. Check the “no, create account now” box near the bottom of the menu.

5、点击注册。这样会打开“创建帐号”页面。

5. Click Register. The create account page opens.

6、输入所需的信息。填写下面的字段:

6. Enter the required information. Fill in the fields below:

名称:输入这个帐号要使用的名称。

Name: enter the name to use for this account.

密码:输入你想使用的登录密码。

Password: enter the login password you want to use.

确认密码:重复上面输入的密码。

Confirm password: repeat the password entered above.

出生日期:选择你出生的年月日。

Date of birth: select the date of your birth.

位置:输入你所在国家的名称。

Location: enter the name of your country.

7、勾选靠近页面底部“我同意条款和规则”方框。

7. Check the “I agree to terms and rules” box near the bottom of the page.

8、点击页面底部的注册按钮。这样会创建一个帐号,并发送一份确认邮件到你提供的电子邮件地址。

8. Click the register button at the bottom of the page. This will create an account and send a confirmation email to the email address you provided.

9、打开你的收件箱。前往你注册帐号使用的电子邮件地址。可能需要先输入电子邮件地址和密码进行登录,才能打开收件箱。

9. Open your in box. Go to the email address where you registered your account. You may need to enter your email address and password to sign in before you can open your in box.

10、打开确认邮件。点击“tonymacx86.com”发送的邮件把它打开。

10. Open the confirmation message. Click on the email sent by “tonymacx86. Com” to open it.

11、点击确认链接。点击邮件中间“确认帐号”这行字下面的链接。你会被带回 Unibeast 下载站点。

11. Click the confirmation link. Click the link below the line “confirm account” in the middle of the email. You will be taken back to the unibeast download site.

12、双击下载标签。靠近页面顶端有一排标签,它就在右侧。这会打开“下载”页面。

12. Double click the download tab. Near the top of the page is a row of tags, which are on the right. This opens the download page.

如果你只看到下拉菜单出现,再次点击下载标签。

If you only see the drop-down menu, click the download tab again.

13、往下滚动,点击 Unibeast。确保你点击后面数字最大的版本,也就是最新的版本。

13. Scroll down and click unibeast. Make sure you click on the version with the largest number, that is, the latest version.

比如说,2018 年 5 月的最新版本是 8.3.2。

For example, the latest version in May 2018 is 8.3.2.

14、点击页面右上角的立即下载。这样会将 Unibeast 下载到 Mac 电脑。

14. Click download now in the top right corner of the page. This will download unibeast to the Mac.

15、下载 Multibeast。这个程序被托管在和 Unibeast 相同的站点,允许你安装合适的驱动程序,以便在 macOS 系统运行 Windows 电脑的扬声器、互联网等实用工具:

15. Download Multibeat. This program is hosted on the same site as unibeast, allowing you to install the appropriate driver to run Windows computer speakers, Internet and other utilities on the Mac OS system

再次双击下载标签。

Double click the download tab again.

点击Multibeast – High Sierra 10.2.0。

Click Multibeat – High Sierra 10.2.0.

点击页面右上角的立刻下载。

Click download now in the top right corner of the page.

下载 macOS High Sierra 系统安装器

Download MacOS High Sierra system installer

1、打开 Mac 电脑的 App Store。点击 Mac 电脑“程序坞”(Dock)里的 App Store 应用图标。图标背景是蓝色,上面有个白色的字母“A”。

1. Open the MAC app store. Click the app store application icon in the MAC dock. The background of the icon is blue with a white letter “a” on it.

2、点击 App Store 窗口右上方的搜索栏。

2. Click the search bar at the top right of the app store window.

3、搜索 High Sierra。在搜索栏输入 high sierra,然后按下 Return 键。

3. Search for high Sierra. Enter high Sierra in the search box and press return.

4、点击 High Sierra 图标右边的下载。安装器会开始下载到 Mac 电脑。

4. Click download to the right of the high Sierra icon. The installer will start downloading to the Mac.

5、等待安装器窗口打开。打开后需要立刻关掉它。

5. Wait for the installer window to open. You need to turn it off immediately after you turn it on.

6、窗口打开时,同时按下 Command 和 Q。这会关掉安装器窗口。

6. When the window opens, press command and Q at the same time. This will close the installer window.

7、打开“访达”(Finder)。点击 Mac 电脑“程序坞”里的蓝脸图标。

7. Open finder. Click on the blue face icon in the MAC dock.

8、点击应用程序文件夹。它就在“访达”窗口左边。

8. Click on the application folder. It’s on the left side of the visit window.

9、确认这里有安装器。安装器的名称类似于“安装 macOS High Sierra”,上面有个山脊图案。只要在应用程序文件夹里确认了它的存在,就可以继续下一步。

9. Make sure there is an installer here. The name of the installer is similar to “install MacOS High Sierra”, with a ridge pattern on it. Once its existence is confirmed in the application folder, you can proceed to the next step.

如果找不到安装器,那就再下载一次。

If you can’t find the installer, download it again.

格式化优盘

Format USB flash disk

1、将优盘插入 Mac 电脑。使用容量至少 16GB 的优盘在电脑上安装 macOS High Siera。

1. Insert the USB drive into the Mac. Install MacOS high Siera on your computer with a USB flash drive with a capacity of at least 16GB.

如果 Mac 电脑没有传统 USB 端口,先连接 USB-C 至 USB 3.0 转换器。

If the MAC does not have a traditional USB port, first connect the usb-c to USB 3.0 converter.

2、打开“聚焦”。点击屏幕右上角的放大镜图标,打开一个搜索栏。

2. Turn on focus. Click the magnifying glass icon in the upper right corner of the screen to open a search bar.

3、在“聚焦”输入磁盘工具。这会在 Mac 电脑上搜索“磁盘工具”应用。

3. Enter the disk tool in focus. This searches the MAC for the disk tools app.

4、点击打开出现“聚焦”搜索栏底下的磁盘工具。

4. Click to open the disk tool under the “focus” search bar.

5、选中你的优盘。点击窗口左上方的优盘名称。

5. Select your USB drive. Click the name of the USB flash drive at the top left of the window.

6、点击靠近窗口顶端抹掉标签。屏幕上会弹出一个方框。

6. Click near the top of the window to erase the label. A box will pop up on the screen.

7、点击弹出框中间的“格式”下拉框。这会弹出一个下拉菜单。

7. Click the “format” drop-down box in the middle of the pop-up box. A drop-down menu will pop up.

8、点击 OS X 扩展(日志式),将优盘设置成和 Mac 电脑一样的文件系统。

8. Click OS X extension (log type) to set the USB disk to the same file system as the Mac.

9、点击“分区方案”下拉框。它就在“格式”下拉框下面。

9. Click the “partition scheme” drop-down box. It’s right below the format drop-down box.

10、点击 GUID 分区图。这个选项就在“格式”下拉菜单中。

10. Click on the partition map. This option is in the format drop-down menu.

11、点击抹掉。这会将优盘重新格式化为 Mac 电脑的文件系统。

11. Click erase. This reformats the USB drive into the Mac’s file system.

12、屏幕出现提示时,点击完成。现在可以创建安装盘了。

12. When prompted, click finish. Now you can create the installation disk.

创建 Unibeast 安装工具

Create a unibeast installation tool

1、打开 Unibeast 文件夹。双击 Unibeast 文件夹来解压缩和打开它。

1. Open the unibeast folder. Double click the unibeast folder to unzip and open it.

2、打开 Unibeast。双击 Unibeast 的 PKG 文件来打开它。

2. Open unibeast. Double click the PKG file of unibeast to open it.

3、屏幕出现提示时,点击打开。这会打开 Unibeast 安装窗口。

3. When prompted, click open. This will open the unibeast installation window.

如果 Mac 电脑目前运行 macOS Sierra 或更新的系统,你需要确认安装 Unibeast 才能继续。

If your Mac is currently running MacOS Sierra or a newer system, you need to confirm that you have installed unibeast to continue.

4、点击继续四次。它就在 Unibeast 安装窗口前四页的右下角。

4. Click to continue four times. It’s in the lower right corner of the first four pages of the unibeast installation window.

5、屏幕出现提示时,点击窗口顶端的同意。

5. When prompted, click agree at the top of the window.

6、选中你的优盘,然后点击继续。点击优盘名称来选中它。

6. Select your USB drive and click continue. Click on the USB disk name to select it.

7、选中 High Sierra,然后点击继续。它应该就在页面中间。

7. Check high Sierra and click continue. It should be in the middle of the page.

8、选择主板类型。取决于 Windows 电脑使用的是 UEFI 或 BIOS,选择一个主板类型:

8. Select the motherboard type. Depending on whether the windows computer is using UEFI or BIOS, select a motherboard type:

UEFI:点击UEFI 启动模式,然后点击继续。

UEFI: Click UEFI startup mode, and then click continue.

BIOS:点击Legacy 启动模式,然后点击继续。

BIOS: click legacy boot mode, and then click continue.

9、如有必要,选择一个显卡,然后点击继续。勾选注入(显卡名称)旁边的方框,设置你偏好的显卡。

9. If necessary, select a graphics card and click continue. Check the box next to injection (graphics card name) to set your preferred graphics card.

如果你的显卡默认支持 macOS High Sierra,那就跳过这一步。

If your graphics card supports MacOS High Sierra by default, skip this step.

10、点击页面右下角的继续。屏幕会提示你输入 Mac 电脑的密码。

10. Click continue in the lower right corner of the page. The screen will prompt you to enter your Mac password.

11、输入 Mac 电脑密码。输入你用来登录 Mac 电脑的密码。

11. Enter the MAC password. Enter the password you use to log in to your Mac.

12、点击 OK。Unibeast 会开始安装在优盘上。完成安装后,就能用优盘在 Windows 电脑安装 macOS High Sierra 了。等待 Unibeast 完成安装期间,更改 Windows 电脑的启动顺序。

12. Click OK. Unibeast will start to be installed on the USB drive. After the installation, you can install MacOS High Sierra on Windows computer with USB flash disk. Change the startup order of your Windows computer while waiting for unibeam to complete installation.

更改 Windows 电脑的启动顺序

Change the startup order of windows computers

1、拔掉所有通过 USB 连接到 Windows 电脑的设备,特别是优盘。

1. Unplug all devices connected to Windows computer through USB, especially USB flash disk.

2、进入电脑的 BIOS 或 UEFI 设置页面。这个过程因电脑而异,通常需要重新启动电脑,然后在电脑一启动就重复按一个键,比如删除(Del)键。

2. Enter the computer BIOS or UEFI settings page. This process varies from computer to computer. You usually need to restart the computer, and then press a key repeatedly as soon as the computer starts up, such as the Del key.

3、找到“启动顺序”部分。它通常位于 BIOS 主页,你可能需要用箭头键跳过“启动”或“高级”标签。

3. Locate the startup order section. It is usually located on the BIOS home page and you may need to use the arrow keys to skip the “boot” or “advanced” tab.

每个 BIOS 的“启动顺序”部分都不一样。如果找不到“启动顺序”,可以查看主板使用手册,或是在网上查找你的电脑型号,找到具体的 BIOS 指示。

The boot order section of each BIOS is different. If you can’t find the “boot order”, you can check the motherboard manual, or find your computer model on the Internet to find specific BIOS instructions.

4、选择可移动设备(Removable Devices)。用箭头键将闪烁的条形图往下移动到可移动设备。

4. Select removable devices. Use the arrow keys to move the flashing bar chart down to the mobile device.

在某些页面上,“可移动设备”可能被称为USB 设备或类似的名字,比如 外围设备(Peripherals)。

On some pages, “mobile devices” may be referred to as USB devices or similar names, such as peripherals.

5、将你选中的启动项移到列表顶端。通常只要选中你要使用的启动项,然后一直按+键,直到它成为“启动顺序”列表的第一位。

5. Move the startup item you selected to the top of the list. Usually, just select the startup item you want to use, and then press the + key until it becomes the first in the “startup order” list.

BIOS 页面底部或右边会有说明,你可以在这里再三确认应该使用哪一个键。

There will be instructions at the bottom or right of the BIOS page, where you can repeatedly confirm which key to use.

6、保存设置,并退出 BIOS。查看页面底部或右边的说明,弄清楚保存并退出应该按哪一个键,然后跟着做。这样就更改了 Windows 电脑的启动顺序,之后插入的优盘会成为首选的启动点。

6. Save the settings and exit the BIOS. Check the instructions at the bottom or right of the page to find out which key to press to save and exit, and then follow. This changes the startup order of windows computers, and the inserted USB disk will become the preferred startup point.

你可能需要按另一个键来确认这个选择。

You may need to press another key to confirm the selection.

在 Windows 电脑安装 macOS

Installing MacOS on Windows computers

1、将 Multibeast 放进优盘。打开优盘文件夹,将 Multibeast 文件拖放到里面。先把它放进优盘,方便之后使用。

1. Put multibeast into the USB drive. Open the USB disk folder and drag and drop the multibeast file into it. Put it into the USB flash drive first, and use it later.

2、从 Mac 电脑移除安装了 Unibeast 的优盘。打开“访达”,点击“访达”窗口左上角优盘名称右边的弹出图标。之后就能移除优盘。

2. Remove the USB drive with unibeast from the Mac. Open “access” and click the pop-up icon on the right side of the USB disk name in the upper left corner of the “access” window. Then you can remove the USB drive.

进行这一步骤之前,确保 Unibeast 已安装完毕。

Before you do this, make sure that unibeam is installed.

3、关掉 Windows 电脑。按住电源键不放,直到电脑完全关机。电脑通常在显示器关闭一两秒后就会彻底关机。

3. Turn off the windows computer. Press and hold the power button until the computer is completely shut down. Computers usually shut down completely after the monitor is turned off for a second or two.

4、将 Unibeast 优盘和空白硬盘都插入电脑。它们应该可以插到电脑的 USB 端口。

4. Insert both the USB and the blank hard disk into the computer. They should plug into the USB port of the computer.

5、启动 Windows 电脑。按下电源键启动电脑。一旦电脑有机会启动,会选择从你插入的优盘启动。

5. Start the windows computer. Press the power button to start the computer. Once the computer has a chance to boot, it will choose to boot from the USB disk you inserted.

6、出现提示时,选择你的优盘,然后按下 Enter,开始安装 macOS。

6. When prompted, select your USB drive, and then press enter to start installing MacOS.

7、选中一个语言,然后点击→。你会被带到安装器的下一页。

7. Select a language and click →. You will be taken to the next page of the installer.

8、点击继续两次。它就在页面右下角。

8. Click to continue twice. It’s in the lower right corner of the page.

9、出现提示时,点击屏幕顶端的同意。

9. When prompted, click agree at the top of the screen.

10、点击屏幕左上方的实用工具菜单项。屏幕上会出现一个下拉菜单。

10. Click on the Utilities menu item at the top left of the screen. A drop-down menu will appear on the screen.

11、

11、


速搜资源网 , 版权所有丨如未注明 , 均为原创丨转载请注明原文链接:【速搜问答】如何在Windows电脑上安装macOS系统
喜欢 (0)
[361009623@qq.com]
分享 (0)
发表我的评论
取消评论
表情 贴图 加粗 删除线 居中 斜体 签到

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址